Changing display from kg to lb

Changing display from kg to lb

Press and hold the F4 key down to get into the configuration menu (Dip switch 1 needs to be on, located under the small back cover on the rear of the indicator).

Under the scale menu, scroll down using the F3 button until you find the menu "Allow kg/lb Edit", change this setting from Disable to Enable.  Press the "*" key to save and then the zero key to exit. Now when you go into the normal weight display the F3 key will have the lb/kg symbol next to it and pressing the key will change between units.


    • Related Articles

    • Changing display from kg to lb

      Press and hold the F4 key down to get into the configuration menu (Dip Switch 1, located under the small back cover on the rear of the indicator, has to be on). Under the scale menu, scroll down using the F3 button until you find the menu "Allow ...

    • Scale shows incorrect weight

      Place a weight of around 40kg in the centre of the scale, note the reading, then move the weight to the four individual corners. Are the weight readings for the corners the same to within +/-0.2 kg? If yes, recalibrate the scales. If no, check the ...

    • Operator display shows scale divisions of 0.01 instead of 0.1kg

      Remove the dip switch cover on the rear of the operator panel and return the position of Dip Switch 2 to “ON”.

    • "Not enough weight" message displayed when trying to calibrate

      This message is displayed when the scale Analogue to Digital (A to D) converter doesn't see enough change from zero to the calibration weight value.  Normally this is a problem when using only 40 kg for calibration. Things to try: Try using 100 kg ...

    • Weight reading is drifting

      Confirm that this happens when a weight is placed on the scale and not touched, and nobody is moving around the scales (movement of the floor/desk can be transmitted to the scale if these are touching the scale, which will appear as if the weight ...