Passenger panel is blank

Passenger panel is blank

If the operator panel is working, check/change the passenger display cable. Swap out the passenger panel.

    • Related Articles

    • Passenger panel shows "Err Char Bad"

      The data being sent from the operator panel is corrupted and the passenger panel is reporting the error as “Bad Char” or bad character received. There are no settings that could be wrong that will produce this error, and you will need to confirm if ...
    • "Bad addr" message on passenger panel

      The command from the operator panel has a standardised format that includes an address byte. The message on the passenger panel indicates that the format received is unexpected. The fault could be with the operator panel, load cell cable or the ...
    • Black dot on the operator panel display

      The operator display has a black spot in the middle because the rear bracket has been fitted upside down, causing pressure to be transferred to the display.  If the bracket is turned the right way up the black dot will disappear.
    • Operator panel switches off soon after it's powered up

      This is because the remote power function is turned is on. Turn the unit on, press and hold the F4 button until you get into the set-up menu.  The indicator will remain on while you scroll to in the I/O menu and change Input One from "Remote Power" ...
    • Printer connected to operator panel is not working

      Press and hold the F4 button to enter the settings menu Press the “C” button (Next) to scroll to the RS-232 menu, and press “M-“ button to select Ensure that the Output is set for “Printer”. Use the F2 and F3 keys to change the selection Ensure baud ...